Home > products > Chemical Centrifugal Pump > IHG vertical pipe chemical centrifugal pump for electricity / Papermaking pump

IHG vertical pipe chemical centrifugal pump for electricity / Papermaking pump

Category:
Chemical Centrifugal Pump
Price:
Negotiation
Payment Method:
D/A, D/P, T/T, Western Union, MoneyGram
Specifications
Flow Q:
1~1200m³/h
Head H:
8~150m
Applications:
Petroleum, Chemical, Metallurgy, Power, Paper, Food And Synthetic Fibers, Etc., The Use Of Temperature -20 ℃ ~ 120 ℃
Caliber:
15~500mm
Power:
0.18~160/6P KW
Speed:
960~2900r/min
Working Pressure:
1.6MPa
Color:
Blue
High Light:

Horizontal centrifugal pump

,

high head Centrifugal Pump

Introduction

IHG vertical pipe chemical centrifugal pump for electricity / Papermaking pump

 

 

 

IHG stainless steel vertical pipeline pump Features:

  1. Shaft seal using the mechanical seal or mechanical seal combination, the use of imported titanium seal ring, medium-sized high-temperature mechanical seal and the use of carbide material, wear-resistant seal, can effectively increase the mechanical seal life.
  2. Easy installation and maintenance, no need to remove the piping system, as long as the removal of the pump seat nut can extract all the rotor parts.

IHG stainless steel vertical pipe pump working conditions:

  1. Ambient temperature <40 ℃, relative humidity <95%.

 

IHG stainless steel vertical pipe pump Model significance:

 

ISG50-160(I)A(B)

ISG: pump type, single-stage single-suction vertical pipe centrifugal pump
50: pump inlet and outlet diameter (mm)
160: impeller nominal diameter (mm)
(I): traffic classification
A: Impeller is cut for the first time
(B): Impeller after a second cut

 

IHG stainless steel vertical pipe pump starts and stop:

 

start and run

  1. fully opens the inlet valve, close the spit out the pipeline valve.
  2. turn on the power, when the pump reaches the normal speed, and then gradually open the spit on the pipeline valve, and adjust to the required conditions.
  3. pay attention to observe the instrument readings, check the shaft seal leakage, the normal mechanical seal leakage <3 drops/min, check the motor, bearing temperature rise ≤ 70 ℃, if found abnormal circumstances, should be promptly treated.

 

IHG stainless steel vertical pipe pump maintenance:

 

 mechanical seal maintenance

  1. Mechanical seal lubrication should be clean without solid particles.
  2. Is strictly prohibited mechanical seal in the dry mill work.
  3. Before starting should pump the pump (motor) a few laps, so as to avoid sudden start ring damage caused by graphite ring.
  4. Sealed leakage tolerance of 3 drops/min, or should be overhauled.
Send RFQ
Stock:
MOQ:
1